Fatally Damaged Derailleur on Road Bike
. Missing Pulley Was the Least of the Problems.
Hmm, reading Big Oak's post about his axle breaking, perhaps things are going around. In my case, they aren't going around. At least I didn't bust a wheel.
I rode my road bike to work this morning. More accurately, I rode it 90% of the way to work this morning. At that point, a rear derailleur pulley bolt departed and flew to points unknown, as did the associated pulley. After some fruitless looking around, I found that I could still power the beast with one particular gear combination as long as I didn’t mind it skipping if I pedaled too hard, and if I held my breath a lot. That let me limp the last two miles in. At lunch, I concluded that I’d been lucky to go two miles, and no jury rigging would keep it together well enough to get home under power. What's more, enough parts of the derailleur are bent, that I think I shall ride Buddy to work for a bit while I see if I can't get a replacement. While I do not recall “ABC Quick Check” instructing us to check the security of derailleur pulley bolts, I shall add this incident to my long and growing list of “ABC” things that go wrong. I can’t really say I’ve ever had a derailleur come apart this way before except when I was dismantling them on purpose. This particular derailleur was last dismantled about 250 miles ago. Maybe it’s bad karma from Big Oak’s axle.
Just as with Jaguars, on rare occasions, it’s best to give the vehicle a ride home…
. Missing Pulley Was the Least of the Problems.Hmm, reading Big Oak's post about his axle breaking, perhaps things are going around. In my case, they aren't going around. At least I didn't bust a wheel.
I rode my road bike to work this morning. More accurately, I rode it 90% of the way to work this morning. At that point, a rear derailleur pulley bolt departed and flew to points unknown, as did the associated pulley. After some fruitless looking around, I found that I could still power the beast with one particular gear combination as long as I didn’t mind it skipping if I pedaled too hard, and if I held my breath a lot. That let me limp the last two miles in. At lunch, I concluded that I’d been lucky to go two miles, and no jury rigging would keep it together well enough to get home under power. What's more, enough parts of the derailleur are bent, that I think I shall ride Buddy to work for a bit while I see if I can't get a replacement. While I do not recall “ABC Quick Check” instructing us to check the security of derailleur pulley bolts, I shall add this incident to my long and growing list of “ABC” things that go wrong. I can’t really say I’ve ever had a derailleur come apart this way before except when I was dismantling them on purpose. This particular derailleur was last dismantled about 250 miles ago. Maybe it’s bad karma from Big Oak’s axle.
Just as with Jaguars, on rare occasions, it’s best to give the vehicle a ride home…
Felix, the Jaguar
7 comments:
You had a car towed in Burlington, WA?
Signed,
Former Skagit Valley Resident, now resident of FTW
At least you avoided having to walk the last two miles to work. Do you wear road or mountain bike shoes on your commute? There is nothing worse than having to walk long distances in road shoes and cleats.
I once had a pedal come apart in a very strange and un-field-fixable manner. I guess you can't check everything before every ride to see if anything is going to fail in an unexpected way--if you did that, the maintenance check would take longer than most rides! The maintenance interval should be proportional to the odds of failure--the less probably the failure, the less often you need to check it. Although I guess there's also an "expected cost" factor to weigh in there, too: even if unlikely, if failure would cause catastrophe, it may pay to check it more frequently than probability of failure would indicate.
Anonymous, I don't recall if that particular tow was from Burlington, but I remember very well that we got towed from Ferndale on the way home from Vancouver. Old Jags are not the most reliable.
Rat Trap. I stick to MTB shoes. I wouldn't want to be mistaken for a duck.
Sorry for the bad karma, man. I guess that goes to show that if you ride something long enough, odd stuff is going to happen. Unless you take your derailleur apart on a monthly basis to clean it, I don't know how you could have kept from losing that bolt. I just cleaned my axle, bearings, and bearing cups in February on that bike.
Well, at least you were close to work. When you ride as much as you do, stuff is going to break. If you're lucky, you'll manage to adapt and not be stranded someplace inconvenient.
Post a Comment
No Need for Non-Robot proof here!